Chinook RV Forum

It is currently September 21st, 2017, 11:55 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Help with Awning
PostPosted: August 4th, 2017, 6:27 am 
Offline

Joined: July 26th, 2017, 10:23 am
Posts: 17
I'm having a problem with the awning, it goes out about 3 inchs and stops not sure if I should force it out. Has anyone run it this problem?

_________________
John 1998 Concourse


Top
 Profile  
Reply with quote  
background-color: #C1CAD2
 

 Post subject: Re: Help with Awning
PostPosted: August 4th, 2017, 3:51 pm 
Offline

Joined: April 22nd, 2017, 10:20 am
Posts: 9
Hi John-
I had the very same problem with my '98 Chinook. I posted the issue on this forum a couple of months ago. Rather than link to the entire string, here's my last post that explains how I fixed it.

So I called Fiamma as recommended and spoke with Bob Snyder. He asked for two photos to verify that it was an awning they made. It was. I described in my email the symptoms - that cranking the mechanism loosened the awning and pulled it away from the rv a little, but then it would go no further.
The guy who sold it to me a month ago said "a spring was broken" and that's why the awning wasn't working. I took it to my local RV repair shop and they said the "awning gears were stripped" and that I should just buy a new one (for about $850).

Bob at Fiamma wrote back to me to say the solution was a lot simpler. See below:

Hi James,

You have either the F45 Plus or F45 Elegance model awning. The biggest difference is if the awning has dual shock absorbents in the back case where the spring loaded lateral arms attach (see drawings below). The F45 Plus has the Dual Shock absorbers (a 3" plastic piece).

I have attached a spare parts drawing of both models for your review. The winch mechanism has changed from the original models.

What you need to do is to have someone pull out on the awning while someone else is turning the crank handle. The crank handle must be turning for the awning to open. Once you have it opened, lubricate the spring loaded lateral arms at the elbows and both ends with a spray lubricant such as silicone and work the arms until they are free. Springs in the lateral arms push the awning open when turning the handle. If the elbows get too stiff from corrosion, the springs are not strong enough to push it open.

Hope this helps.
Regards,
Bob Snyder
Operations Manager
Fiamma, Inc.
http://www.fiammausa.com

Sorry, I couldn't figure out how to attach the drawings he sent me. But this gives you an idea of how helpful Fiamma is. The original awning on my 1998 Chinook is now working perfectly.

_________________
Beaver
'98 Concourse


Top
 Profile  
Reply with quote  
 Post subject: Re: Help with Awning
PostPosted: August 4th, 2017, 4:02 pm 
Offline
User avatar

Joined: February 17th, 2015, 1:57 pm
Posts: 232
Location: Auburn WA
Just to make sure you know there was a mass shooting at Fiamma killing multiple employees and they have suspended operations until further notice. They are a relatively small company and many key personnel were killed.
The whole thing is very sad.

_________________
Steve aka SMan
2004 Premier V10


Top
 Profile  
Reply with quote  
 Post subject: Re: Help with Awning
PostPosted: August 4th, 2017, 4:28 pm 
Offline

Joined: July 26th, 2017, 10:23 am
Posts: 17
That is very helpful I will try it and let you know.

_________________
John 1998 Concourse


Top
 Profile  
Reply with quote  
 Post subject: Re: Help with Awning
PostPosted: August 7th, 2017, 5:16 am 
Offline

Joined: July 26th, 2017, 10:23 am
Posts: 17
Got the awning out and greased it,seems to be working find, but the legs were very stiff and one of the brackets at the top snapped when I turned it.
Not sure if anyone has ordered that part and where they got it.

_________________
John 1998 Concourse


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB® Forum Software © phpBB Group