Chinook RV Forum
http://chinookrvforum.com/

Concourse wall and roof internal structure drawings
http://chinookrvforum.com/viewtopic.php?f=6&t=278
Page 1 of 1

Author:  Blue~Go [ November 15th, 2015, 9:00 pm ]
Post subject:  Concourse wall and roof internal structure drawings

Hi folks,

Here are some Chinook factory drawings, circa 1999, for the internal layout of the passenger side wall and the roof. The wall drawing is only for the passenger side, but the driver's side can be extrapolated. I had occasion to look behind the walls in my 1999 Concourse and it is almost exactly as the drawings show.

I had assumed the the Premier was similar, but another forum member recently re-did his windows and we discovered that instead of largish areas of plywood around the windows, it's more like a perimeter frame of flat-laid 1 x 3 (or similar) pine-ish boards. I have a really bad photo that shows it, and I will include that here for comparison.

So, first the roof, Concourse circa 1999:

Attachment:
Roof construction detail.pdf [617.57 KiB]
Downloaded 182 times


Passenger side wall, Concourse circa 1999:

Attachment:
wall construction detail.pdf [666.95 KiB]
Downloaded 142 times


Driver's side wall, Premier, circa 1998 (sorry for the very poor quality but it shows the difference from a Concourse wall):

Attachment:
Building interior, driver wall Premier ca 1998.png
Building interior, driver wall Premier ca 1998.png [ 347.53 KiB | Viewed 577 times ]

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/