Handle Bar Light

Split from General / Technical for discussion of anything electrical, electronic... 12v, Inverter, Satellite, Headlights, flashlights etc.
Post Reply
inacioface
Posts: 50
Joined: October 3rd, 2022, 6:32 am
Location: Bethlehem, PA

Handle Bar Light

Post by inacioface »

I connected the exposed wires from my handle bar light to a 12V power supply and the light still works, but I was wondering if a schematic exists for connecting these two wires to my vehicles electrical circuit?
Attachments
PXL_20221207_162235445.jpg
PXL_20221207_151123826.jpg
PXL_20221207_162248073.jpg
PXL_20221207_162212044.jpg
1998 Chinook Concourse (Rear Entry) | Ford E350 Triton V-10 Chassis
User avatar
caconcourse
Posts: 490
Joined: October 31st, 2014, 10:25 pm

Re: Handle Bar Light

Post by caconcourse »

The handle light is on the same circuit as the porch light above it, and the stair light, if you still have the lighted step. There is a switch panel of 3 switches mounted on the bathroom wall between the bathroom door and the rear door. One switch controls the three lights mentioned. A second switch controls the side light (other porch light) under the awning and the third switch controls a light next to the dump valves (for night dumping?!).

The lights are on a DC circuit in the brown box, either the "O/H Lights" circuit or the "Ceiling Lights" circuit, probably the former.
Clay
2001 Concourse
Santa Barbara, CA
Post Reply